SYNC-3 (formerly
3-BANGER) Three
Output
Controls a single
3-light signal, and has three caution/conflict modes (Flashing RED,
YELLOW Alternating Red+Yellow).
Supports Linking
Supports Linking
SYNC-5
Five Output + PED controller
Controls a single
3-light signal
and
has outputs for a single pedestrian WALK/DON'T WALK.
Has four caution/conflict modes:
Flahsing RED, Flashing YELLOW, Alternating RED/YELLOW, FLASHING RED and Ped outputs alternate
Supports LINK feature, allowing multiple boards to be connected.
NEW: Alternate version (SYNC-5+BUTTON) available that replaces the caution-mode input with PED Push Button Input. This version keeps the Don't Walk light "solid ON" until a button-press is detected. The Walk will then cycle as normal. This version has no flashing caution modes.
Has four caution/conflict modes:
Flahsing RED, Flashing YELLOW, Alternating RED/YELLOW, FLASHING RED and Ped outputs alternate
Supports LINK feature, allowing multiple boards to be connected.
NEW: Alternate version (SYNC-5+BUTTON) available that replaces the caution-mode input with PED Push Button Input. This version keeps the Don't Walk light "solid ON" until a button-press is detected. The Walk will then cycle as normal. This version has no flashing caution modes.
Signal + 1 PED
UK
SYNC-3 (sequence used in England /
United Kingdom)
Controls a single
3-light signal
with
the following sequence: RED/YELLOW (both on),
GREEN,
YELLOW, RED
Has three caution/conflict modes:
Flashing RED, Flashing Yellow, Alternating RED / YELLOW
Supports LINK feature, allowing multiple boards to be connected.
Has three caution/conflict modes:
Flashing RED, Flashing Yellow, Alternating RED / YELLOW
Supports LINK feature, allowing multiple boards to be connected.
SYNC-5-RANDOM
(Random Mode added to
Caution flashing modes)
NOTE:
Link feature is not active / Not Linkable to other boards
Green-Yellow_Red and
W/DW outputs
work
light standard SYNC 5, except the link feature is not functional
Flashing modes:
Flahsing RED,
Flashing YELLOW, Alternating
RED/YELLOW, FLASHING
RED and Ped outputs alternate, RANDOM : One of Five outputs
light
randomly, with random durations as well
DOGHOUSE-1
Five outputs will
control: Red,
Yellow,
Green, Green-Arrow, Yellow-Arrow
Three caution/conflict modes:
Flashing RED, Flashing Yellow, Alternating RED / YELLOW
Support for linking
Three caution/conflict modes:
Flashing RED, Flashing Yellow, Alternating RED / YELLOW
Support for linking
DOGHOUSE-2
Five outputs will
control: Red,
Yellow,
Green, Green-Arrow, Yellow-Arrow
Three caution/conflict modes:
Flashing RED, Flashing Yellow, Alternating RED / YELLOW
G
Y + G-Arrow
R + G-Arrow
R + Y-Arrow
R
Three caution/conflict modes:
Flashing RED, Flashing Yellow, Alternating RED / YELLOW
G
Y + G-Arrow
R + G-Arrow
R + Y-Arrow
R
DOGHOUSE-5
Similar to
DOGHOUSE-1 but with
the following sequence:
Step 1: RED Light with GREEN Arrow
Step 2: RED Light with YELLOW Arrow
Step 3: RED
Step 4: GREEN
Step 5: YELLOW
Step 6: RED
(repeat cycle)
Step 1: RED Light with GREEN Arrow
Step 2: RED Light with YELLOW Arrow
Step 3: RED
Step 4: GREEN
Step 5: YELLOW
Step 6: RED
(repeat cycle)
DOGHOUSE-6
Similar to
DOGHOUSE-1 but with
the following sequence:
Step 1: RED Light with GREEN Arrow
Step 2: RED Light with YELLOW Arrow
Step 3: GREEN Light
Step 4: GREEN Light with GREEN Arrow
Step 5: YELLOW Light with YELLOW Arrow
Step 6: RED Light
(repeat cycle)
Step 1: RED Light with GREEN Arrow
Step 2: RED Light with YELLOW Arrow
Step 3: GREEN Light
Step 4: GREEN Light with GREEN Arrow
Step 5: YELLOW Light with YELLOW Arrow
Step 6: RED Light
(repeat cycle)
2LIGHT4WAY
Two Section 4-way
Signal sequence:
Caution Mode: Flashing RED
Wiring Instructions (.pdf)
| Direction
#1 |
Direction
#2 |
|
| Step
1: |
Green |
Red |
| Step
2: |
Green + Red |
Red |
| Step
3: |
Red |
Red |
| Step
4: |
Red |
Green |
| Step
5: |
Red |
Green + Red |
| Step
6: |
Red |
Red |
Caution Mode: Flashing RED
Wiring Instructions (.pdf)
DARLEY-1944 (D-480 Simplex)
Caution Modes: Flashing RED, Flashing Yellow, Alternating RED/YELLOW
Timing for Steps 1,3,5,7 are user programmable .
This firmware does NOT support the link function.
| Step
1: |
Green |
| Step
2: |
Green +
Yellow (Fixed 1 second timing) |
| Step
3: |
Yellow |
| Step
4: |
Red + Yellow
(Fixed 1 second timing) |
| Step
5: |
Red |
| Step
6: |
Red + Yellow
(Fixed 1 second timing) |
| Step 7: | Yellow |
| Step 8: | Green + Yellow (Fixed 1 second timing) |
| (repeat cycle) |
Caution Modes: Flashing RED, Flashing Yellow, Alternating RED/YELLOW
Timing for Steps 1,3,5,7 are user programmable .
This firmware does NOT support the link function.
By Traffic Professor Willis Lamm
| (ID:CHYO) | |
| Step
1: |
All lights off for 1/2 second, then Green |
| Step
2: |
Green +
Yellow |
| Step
3: |
All lights off for 1/2 Seccond, then RED |
| Step 4: | Red + Yellow |
| (repeat cycle) |
Caution Modes: Flashing RED, Flashing Yellow, Alternating RED/YELLOW
Timing for Steps 1 through 4 are user programmable .
This firmware does NOT support the link function.
Timing for Steps 1 through 4 are user programmable .
This firmware does NOT support the link function.
By Traffic Professor Willis Lamm
Would also work for a Darley C-811 Signal
By Traffic Professor Willis Lamm
For use on 3-output or 5-output board.
Outputs 1 and 2 (Green and Yellow) flash together 50 times per minute.
Output 3 (RED) flashes opposite of outputs 1 and 2 (for alternating flash if desired).
For use on flashing signals which require 50 flashes per minute.
SPEECH-REV-1:
Programmable RED, GREEN, YELLOW times
Stays RED until caution input is triggered via external pushbutton.
Red light also triggers the DON-T WALK OUTPUT for 1-second to sound a buzzer indicating speech has run too long. Great for Toast Masters speech events.