Joezgarage Support Page
(work in progress)

Troubleshooting aid for voltage measurements and ohm readings (PDF)

How to change out the Control IC (Firmware upgrade)

FAQ Page

Symptoms:

One of the lights stays on all the timeShorted triac.  
Typical causes:
An output shorted to the common terminal
Attempt to drive too many bulbs exceeding the output capacity.
Surge caused by failing bulb causing over current condition.
Board is dead.Possible causes:
Blown fuse.
Input resistor failed due to modified voltage intput (i.e. Dimmer or Modified Sine-Wave inverter, etc...)

For Repairs, please contact us first for a "Return Merchandice Authorization" and then
ship item to:

JoezGarage
P.O. Box 39156
Downey, CA 90239-0156
Attn. Repair Dept.

Include a printout of at least one email message(s) with Joezgarage.com  and also include a PRINTOUT OUT of the return address boards are to be shipped to.
Return shipping is via USPS Priority mail and is $7