3-BANGER
Three-Output Traffic Light Signal Sequencer / Controller
For controlling a single 3-light signal
(emulation use only)
[Firmware] [Instructions (pdf)] [Wiring Reference] [Setting Light Times] [Changing Caution Modes] [Contact us] [FAQ] [Home]
Three-Output Traffic Light Signal Sequencer / Controller
For controlling a single 3-light signal
(emulation use only)
[Firmware] [Instructions (pdf)] [Wiring Reference] [Setting Light Times] [Changing Caution Modes] [Contact us] [FAQ] [Home]
| Features: |
| ALL Screw Terminals, no soldering required |
| Compact
Size: 3" X 2-1/2" |
| 100 Watts Max per output channel |
| Simple-to-use Single-Button time setting |
| Retains timing / settings after power is removed |
| 2 Caution
Modes: Flashing RED
Flashing YELLOW |
|
Bring your traffic signal to life with
this traffic-controller /
sequencer circuit board. This circuit boards has 3 outputs: GREEN,
YELLOW, RED
Each lights timing can be set differently, with a possible range of 1/4 second to 25 minutes PER LIGHT. Connecting the CAUTION INPUT screw terminals together engages 1 of 2 user-selectable CAUTION MODES. Removing the connection will return the board to normal sequence operation. There is a user replaceable fuse. Fuse type is GMA 2 Amp 125/250VAC available from any local electronic store. |
| Controller / Sequencer Specifications | |
| Range (Min - Max) | |
| Operating Voltage: | 108 - 120 VAC |
| Output
Channels: |
3 signal: green,
yellow, red 2 pedestrian: Walk , Don't-Walk |
| Wattage per output channel: | 100 watts MAX @ 120VAC
(fuse protected) |
| Green Light Timing: | From 1/2 second to 10 MINUTES |
| Yellow Light Timing Range: | From 1/2 second to 10 MINUTES |
| Red Light Timing Range: | From 1/2 second to 10 MINUTES |
| 2 Caution Modes: | Flashing
RED Flashing YELLOW |
| Board Dimensions (L x W x H): | 3" x 2-1/2" x 1" |